The Aspects of Immigration into Australia

The Aspects of Immigration into Australia Immigrants are individuals that have come into a country to be residents of the country. There are various reasons that can make an individual leave his or her country and seek residence in another country. Whereas some individuals may migrate to another country due to the unfavorable social, political, and economic conditions in their countries, others may opt to migrate from their country just to join the other members of the family who had moved earlier to these countries.Advertising We will write a custom essay sample on The Aspects of Immigration into Australia specifically for you for only $16.05 $11/page Learn More The latter category does signify the kind of tie that the immigrants have with their homeland. This often poses economic and political challenges to the receiving nation. It also has social influence on the host country as it defines the identity and nationalism of the immigrants.  There are millions of immigrants all over the world. The high level of economy in the developed nations often attracts immigrants from the developing countries. Australia is one such country that has attracted many immigrants from the developing nations. The country had earlier received European settlers in the eighteenth century who helped improve the country’s economy. The immigrants from other countries started flowing into the country in the early twentieth century. The kind of immigration that was witnessed in Australia up to the early 1970s is different from the immigration that has been witnessed in the last thirty years. The factors that led to immigration in the earlier times are quite different from what leads to the present immigration. Besides, the increased terrorist attacks especially in the Middle East countries have led to the development of immigration policies that are strict. The migration of individuals from one country has different issues that concern both the country of origin and the recipient nations. The c ountries of origin of the immigrants and the host country often have social, cultural, economic, and political differences that will influence their reception and accommodation of the immigrants. The immigrants are often from different ethnic communities, language groups, and races. Thus, their formation of a single community in the host country brings forth issues like racism and ethnicity among the society. There are differences in the culture of the communities including their religious beliefs and practices. The different economic, social, or demographic factors will also affect the resettlements of the immigrants in the host countries. The immigrants with low-income will be forced to reside in the regions that have low costs of living. Such regions, however, have other adverse conditions that may pose problems to the general well being of the immigrants.Advertising Looking for essay on social sciences? Let's see if we can help you! Get your first paper with 15% OFF Learn More The influx of immigrants to a given country also has certain significant impacts on the host country. The immigrants may dominate the region with their new culture and erode the culture of the natives of the country. Their accommodation can also have negative economic impacts on the country. Besides, the immigrants to a given country may turn out to be agents of some terrorist attack on the nation. As a result, the different nations have developed policies that define the immigration measures. The political history of a given country, the economic status of the country, and the social factors like religion in the country often form the basis for the development of such policies. It is required that immigrants follow the stipulated steps when getting into a given country. A number of literatures are available that examine the different aspects of immigration into Australia. These researches mainly focus on the aspects of nationalism and national identity among the different individuals. They focus on aspects like interaction between culture, the political systems, and the governmental regulations on immigrants and immigration. There are materials that examine the trends in immigration that have been recorded in the country in the recent years. The countries of origin that send the majority of the migrants to Australia are also examined. A key issue that emerges is that the immigration of individuals into a country brings the country into a global scene. In the book The Australian people: an encyclopedia of the nation, its people and their origins, Jupp (2001) illustrates on the composition of the Australian population. The natives of Australia, the earlier immigrants into the region, and the pattern of immigration and settlement that has been recorded in Australia are provided in the text. One of the issues that have generated debates is the original inhabitants of the country. Issues have been raised concerning the period in which the fi rst human existence was recorded in the land that has no land connection to the neighboring continents like Asia. The other issue that has also raised debates is the means of transport that was used by the first visitors to the country. Jupp states that the first individuals to arrive in the country were from the South East Asia and used sea routes, as there was no land bridge connecting Australia. However, the author is not certain on the type of sea vessels that these individuals used. Jupp notes that the Aborigines are the oldest residents of the region and are thus the indigenous peoples of Australia.Advertising We will write a custom essay sample on The Aspects of Immigration into Australia specifically for you for only $16.05 $11/page Learn More Jupp observes that the notion of culture and self-identity was first seen in these earliest inhabitants of Australia. There are archeological evidences that portray the earliest Aborigines as being sensitive t o what can be regarded presently as the values and identity derived from the culture of a group of people. Jupp (2001) points out that both the ancient and the modern Aborigines are ‘motivated by the impulses to lead a worthwhile life, to be known and respected, to achieve honor, to develop and maintain relationships with other human beings, and to leave something behind for future generation’ (p.6). This would later define the kind of resistance that the Aborigines offered to the European settlers who appeared in the country in the late eighteenth century. Their attack on the European settlers often followed some misconduct by the foreign settlers. The natives were fully aware of the impacts that the settlement of the Europeans would have on the social and economic status. The Europeans had in mind that the Aborigines were primitive and that their land was free to be grabbed by the white settlers. The enmity between the Aboriginal people and the Europeans was eroded by the attempts of the Aborigines to assimilate the white settlers and adapt the European culture to the requirements of the native culture. Jupp notes that by the time the European settlers arrived in Australia in 1788, there were over 200 languages spoken in the country. The languages marked the different social groups that occupied the region. The groups that spoke similar languages were seen to live adjacent to each other and had nearly similar cultural beliefs and practices. The influx of the immigrants later eroded most of these native languages and as Jupp (2001) points out, currently there are Aborigines in the country who proclaim identity for languages that are no longer spoken (p.7). More people from the European and Asian continents migrated into the country in the years following the settlements of the first Europeans and more pressure was put on the Aboriginal people in different parts of the country. Their culture continued to be assimilated by the foreign cultures and the British culture and language dominated the country.  Jupp proceeds to examine the Middle East countries that sent migrants to Australia. He observes that the countries in the Middle East also produced a good proportion of the immigrants in Australia. One of the Middle East countries that sent emigrants to Australia is Lebanon.Advertising Looking for essay on social sciences? Let's see if we can help you! Get your first paper with 15% OFF Learn More The migration of the Lebanese to Australia began in the late nineteenth century (Jupp, 2001, p554). Korea is another country that has immigrants to Australia. Their major migration was witnessed in the early 1970s due to the withdrawal of the Korean soldiers from the Vietnam War (Jupp, 2001, p.547). There are immigrants from other countries like Pakistan, Palestine, Afghanistan, Armenia, and many others. Jupp also examined some of the reasons that led to migration from Middle East countries to Australia. Several reasons contribute to the movements of emigrants from a given country. The movement of the emigrants from the various Middle East countries was caused by the economic, political, or social factors in the region that were not favorable. Religious factors were key contributors of such movements. Other factors like natural calamities also contributed to their departure to Australia. Jupp observed that the economic difficulties that rocked countries like Lebanon in the late nine teenth and early twentieth century contributed largely to emigration of Lebanese to Australia. The population of the country was growing rapidly and land was increasingly becoming a scarce commodity. Settlement and economic activities like farming became hard. There were also national disasters like drought and plagues that had hit the rural parts of the country. Besides, the country had been under the rule of the Ottoman Empire since 1521 up to the World War I. the Ottoman Empire, though tolerant to different religious teachings, was mainly Islamic and gave preference to the Islamic religion. As such, the Christians during this time were often persecuted. The Lebanese were mainly Christians and the persecution could contribute to their migration to Australia.  Other books have similar views provided by Jupp (2001). The book Australia’s Immigration Revolution by Markus et al (2010), also examines the patterns of immigration in Australia. It is observed that the earlier immi grants in Australia were mainly the Europeans, particularly the British and Irish. The immigration pattern changed and the proportion of European immigrants decreased as that of the Asian immigrants increased. This is the trend observed currently.  Some researchers have sought to highlight the effects that such globalization has had on the culture of Australian. In his work, â€Å"Globalization: A threat to Australian Culture†, John Pickering (n.d) focuses on the interaction of globalization and the Australian culture in two different perspectives, the theoretical and historical perspectives (p.47). Pickering focuses on the interaction between the popular cultures in Australia like sports. He also examines how globalization interacts with the Australian political culture and how it helps define the kind of government systems adopted by Australia. Pickering observes that the globalization can be advantageous to the country if the country is able to withstand the influence of the external cultures. The author observes that the Australian culture has withstood the pressure from external cultures brought about by the trade across different countries. They have managed to use the foreign cultural and economic forces to improve on the local industries.  In the article Guest Editorial*Comparative Analyses of Transnationalism: a geographic contribution to the field.   Dunn (2008) provides a comparative analysis of transnationalism- a concept that also has implications on the cultural interactions among different communities. Dunn gives views similar to those given by Pickering on globalization as an aspect of transnationalism. Immigration is described to promote transnationalism in the country as international business organizations are attracted into the country. As Dunn (2008) illustrates, transnationalism can have negative or positive implications on the host country depending on the ability of the natives of the country to hold onto their cultural ide ntity.  The cross-cultural interaction raises other issues like religion. There are literatures that examine the plight of Islam as a religion in the country, the individuals that are against the religion, and those that support its establishment. The Islamic religion particularly received bad reputation among the Australians. In Representation of Islam in the politics of Mosque development in Sydney, Dunn (2001) examines the constructions of the Islamic culture among the Australians owing to the stereotypes that were developed by the media in Australia. The political issues that have arisen following the need to establish the religion are contained in such literatures. Dunn considers the difficulties that Muslims face in Australia that stem from the prevailing racism. The Muslims in Australia were seen to suffer much from the racism that was practiced in the country due to the dominance of the Christian religion in the country. Dunn (2001) described the difficulties that the Musl ims encountered in establishing a Mosque in Sydney. Those who identify themselves with the religion have limited access to services like employment opportunities. Similar views were later provided by Dunn et al (2007, p.569).  Racism is an issue that is common in a multiracial environment. The immigrants in Australia have come from countries in the European and Asian continents. The practice of racism is thus common among these immigrants and the natives of the country. The country is in the process of reconciling the racial groups and promoting peaceful coexistence. Several literatures focus on racism in relation to the cultural interaction among the Australians. There are researches that have been conducted to study the concept of racism in the contemporary Australia and how the Australians perceive the practice, its underlying roots, and the appropriate remedy. In the article, Contemporary racism and Islamaphobia in Australia, Dunn et al (2007) provide an analysis of the Islami c stereotypes developed among the Australians. The study illustrates how racialization has been used to develop a negative image of the Islamic religion in the region. There is an evident relation between the country of origin of the immigrants and their religious beliefs and practices.  The practice of racism poses other challenges to the immigrants. The immigrants from different countries in the Middle East may opt to migrate to Australia for a number of reasons. Most of the immigrants are attracted by the better living standards that they feel can be obtained in the country. They often run away from the adverse economic situations that prevail in their home countries. They are attracted by the economic opportunities in the region that can help them raise their standards of living. Some are also forced out of their countries by the socio-political factors that are not favorable in their respective countries. These situations faced the early immigrants from the Middle East countr ies. In migrating to the country, the immigrants may fail to recognize the possibility that their expectations may not be met owing to certain factors in the country. Racial discrimination is often highly prevalent in such areas as was witnessed in Australia.  Another problem that is faced by the immigrants is the inability to speak the languages common in the country. The immigrants that have moved into the country recently find difficulties in speaking the English language that is officially used in the country. It was observed that the Lebanese in Australia had low-level proficiency in the English language, although the proportion is higher compared to the immigrants in the US as was observed by Antecol et al (2001). A substantial proportion of the Lebanese in Australia could not speak the language at all (see also Jupp, 2001, p.564). These are the bitter fruits of racism prevalent in the country. The high rates of unemployment can also be linked to the discrimination based on race, religion, or nationality. The early immigrants used to settle in the major cities of the country. However, with the increased cost of living, the immigrants are forced to resettle in the rural areas and other small towns where the cost of housing is still low. The other problem that results from the increasing cost of living is poor living conditions that cause health problems to the majority of the immigrants. Even though there has been a significant increase in employment rates among the different immigrants in Australia, there is still high level of unemployment among the immigrants. Jupp (2001) observed that the rate of unemployment was still high among the Lebanese in Australia despite the increase in occupation that had been witnessed in the recent years (564). The number of Australian professionals of the Lebanese origin is still very low compared to the total population of the professionals in the country. The low level of income dictated the settlement areas of the im migrants. The immigrants were often forced to reside in remote areas with little security and more exposure to environmental health hazards. All these challenges are related in some way to the practice of racism and the ethnoculture in Australia.  Forrest and Dunn had also focused on the issue of racism in Australia in their previous work. In the article Racism and intolerance in Eastern Australia: a geographic perspective, Forrest and Dunn (2006b) focus on racism as it is developed from the individual perceptions of self-identity and national identity. Various forms of racism are highlighted in the text. They share similar views by Dunn et al (2004) in Constructing Racism in Australia. The concept of racism is seen as being related to cultural and political hegemony, where some racial group would want to dominate over other groups that they consider inferior and less powerful.  In Constructing Racism in Australia, Dunn et al (2004) examines various aspects of racism in Australi a. Jupp (2001) had noted that the factors and the patterns of migration of the Lebanese to Australia up to 1970s were different from the patterns that are witnessed currently. Similarly, Dunn et al (2004) observed that the racism that was prevalent up to the 1970s is different from the racism experienced to date (p.410). The old racism considered some races inferior and other racial groups were supposed to be a distant from them. Similar views were also provided by Forrest and Dunn (2006b, p.168). The new racism considers the minority groups to be threats to national unity. The earlier Lebanese immigrants in Australia were mainly Catholic Christians with few Muslims. The Lebanese immigrants in the contemporary Australia have a larger proportion of Muslims and lower percentage of the Catholic Christians (Jupp, 2001, p.563). Besides, the current migration from Lebanon to Australia is mainly due to the conflicts that are experienced in the country and the other Middle East countries.  In the article ‘Core’ culture hegemony and multiculturalism Forrest and Dunn (2006a) describes how the process of developing the policies to have a multicultural society in Australia was faced with difficulties. There were rivalries among the dominant communities in the society.  Racism was used to despise some religions like Islam. Different issues of nationalism and national identity arise during the development of the immigration policies by a country. As Forrest and Dunn (2006a) described, some of the individuals would want that the different communities be integrated into a nation with equal citizens. Others would be of the opinion that the other cultures be assimilated in a single dominant culture whereas others would want free multicultural environment. The development of the immigration policies in Australia was challenged by the dominance of the Europeans in the region. The Europeans had settled in the area as from late nineteenth century and had suppressed the other communities like the native Aborigines and the immigrants from other parts of the world. Their language and culture was then dominant in the country. The British, in particular, wanted immigration policies that would help cultivate their culture as the dominant community in the country. Forrest and Dunn (2006a) assert that a multicultural society is often challenged by a need by a dominant culture to assimilate the other cultures.  The dominant communities in such setups often want to defend their culture and maintain their self-identity and national identity. The policies so developed are embraced by some sense of ethnocentrism. Forrest and Dunn (2006a) noted that there is a notion in the country that there is native culture (the Anglo culture) that every new immigrant into the country has to adapt. Similar views were also provided the following year by Forrest and Dunn (2007). The practice has been seen to impede the attempts to build a national identity in a multicul tural society. The nature of immigration policies developed in a country has impacts on the welfare of the immigrants as they can influence the legal status of the immigrant. The legal status of the immigrant in a given country is of great significance to his operations within the country. The individuals that have obtained legal entry into the country are entitled to several services within the country. Accessing health facilities and the other social institutions is not very easy for individuals with illegal entry. The rates of employment among these groups of individuals are high since most of the employment opportunities will require some sort of identification on the immigrants. Besides, the psychological pressure stemming from crossing the border illegally and the possible consequences of such act always pose challenge the mental health of the immigrants.  In the article Constructing racism in Sydney, Australia’s largest EthniCity, Forrest and Dunn (2007) examines the challenges that racism poses to the immigrants in the city of Sydney. They notice that the modern immigrants to the country are economically stable and reside in the large cities of the country. The multi-cultural environments give more room to the practice of racism. The Muslims, in particular, are portrayed to have difficulties in establishing their worship center in the city that is has been dominated by Christianity. Other materials examine the settlement patterns of the immigrants in the country. They put emphasis on how the patterns affect the immigrants’ identity. Researches have been conducted that consider the settlement patterns of the immigrants in the major cities of the country. The factors that influence the settlement patterns as well as the effects that the settlement patterns have on the immigrants and the country are also examined. The difference in human capital among the immigrants and their legal status in the country may influence the regions of settlem ent that receives the immigrants. In the article Immigration in gateway cities: Sydney and Vancouver in comparative perspective, Lee and Murphy (2001) describe the factors that affect the distribution of the immigrants settlers in the cities of Australia through comparison of the settlement witnessed in the cities. They highlight the effects that the increase of the immigrants has on the country. In particular, they consider that the facilities in the major cities that currently attract more immigrants should be expanded to accommodate the large number. This illustrates the effect that the immigrants’ ties with the homeland have on the economy of the host country. Ley and Murphy (2001) notes that the early immigrants to the country from the Middle East were mainly low-income earners and were forced to settle in the rural areas and the small cities where the cost of living was manageable. On the other hand, the current immigrants are mainly individuals who can afford the high standards of living and do settle in the big cities. Sydney has been found to be the major immigrant-receiving city in Australia (see also Forrest Dunn, 2007, 700). Ley and Murphy describes the strategies that have been used by the local governments to plan the city of Sydney in Australia and Vancouver in Canada to accommodate the diverse community of immigrants. However, they point out that the planning process is faced by certain problems. The kind of settlement has a connection with the cultural identity of the immigrants. The individuals who migrate and settle in the rural regions have high ability to form the social community organizations that can help cultivate their culture. On the other hand, the large cities are cosmopolitan and the cultivation of an ethnic culture may not be possible. The immigrants that have settled in the large cities are then more likely to lose their cultural and national identity and be absorbed by the native culture.  Despite the practice of raci sm in these cities, it has been noticed that a strong bond remains among the immigrants from the same origin. This has often impeded the assimilation of minor culture by the major cultures. In the study entitled Rethinking Assimilation Theory for a New Era of Immigration Alba and Nee (1997) illustrate how assimilation is no longer a big issue among the immigrants due to the strengthening ties the immigrants have to their homeland and among themselves. The authors hold views similar to those given by Jupp (2001) and Giorgas (2000). Most of the immigrants in the country have ties to the members of their cultures within the country and back in the homeland country. The Koreans entered the country illegally. However, they were later accepted into the country and most of these individuals invited their family members from Korea to stay in the country leading to their increase in number. The Korean population in Australia had grown to 4500 according to the 1981 census (Jupp, 2001, p.547). The Australian Lebanese have been seen to form social community organizations that draw members from them same origin. Churches, mosques, cultural centers, and educational centers have been established in the country. A significant proportion of such organizations serve the Lebanese in the country, and yet others serve the Arabic a community as an entity. The Australian Lebanese Association is one such organization that was established to serve the interest of the Lebanese. The association, established in 1951, was able to embrace effectively the Lebanese community in these early times. A study by Giorgas (2000) also showed that the ethnic communities could be used by the immigrants to solve their problems like social isolation and lack of employment (p.2). The ties also prevent the communities from being assimilated by the cultures in the country. These different literatures on the immigrants and immigration into Australia mainly focus on the impacts that the interaction of differ ent cultures have in the individual cultures. It is largely observed that the need by some cultures to be left dominant in the multicultural society is the main cause of racism that is seen to be prevalent in the region. The languages that individual speak help in cultivating their culture. In this regard, the dominant communities that would want to suppress the other cultures often use their language as the tool. The use of the English language in Australia was a European strategy to assimilate the cultures of the immigrants from other countries. The immigrants that are not ready to adapt the new culture often face difficulties like lack of employment. Even professional and skilled immigrants who cannot speak the English language cannot apply their expertise to the Australian system due to the language difference. The different literatures reveal that the Australians have different views on racism and its causes. The effects of the practice are generally adverse. It is observed tha t the building of a national identity is affected negatively by the practice of racism in the region.  Several other literatures are available that tackle migration and immigration issues across the countries. However, the literatures are challenged to base on migration in particular nations and minority groups (International Migration Institute, 2006, p.2). A lot of focus needs to be put on the dynamic nature of the different aspects of migration and immigration. Reference List Alba, R. and Nee, V., 1997. Rethinking Assimilation Theory for a New Era of Immigration. International Immigration Review 31(4); 826-874 Antecol, H. et al. 2001. Immigration Policy and the Skills of Immigrants to Australia, Canada, and the United States. Discussion Paper No. 363. Web. Available from: ftp://repec.iza.org/RePEc/Discussionpaper/dp363.pdf . Dunn, K., 2001. Representation of Islam in the politics of Mosque development in Sydney. The royal Dutch Geographical Society 92(3); 291-308 Dunn, K. et al . 2004. Constructing Racism in Australia. Australian Journal of Social Issues, 39(4); 409-430. Dunn, K. et al. 2007. Contemporary racism and Islamaphobia in Australia. Ethnicities 7(4); 564-589 Dunn, K., 2008. Guest Editorial*Comparative Analyses of Transnationalism: a geographic contribution to the field. Australian Geographer, 39(1); 1-7. Forrest, J. and Dunn, K., 2006a. Core’ Culture Hegemony and Multiculturalism: Perceptions of the Privileged Position of Australians with British Backgrounds. Ethnicities, Vol. 6: pp. 203. Forrest, J.and Dunn, K., 2006b. Racism and Intolerance in Eastern Australia: a geographic perspective. Australian Geographer, Vol. 37, No. 2, pp. 167-186. Forrest, J and Dunn, K., 2007. Constructing Racism in Sydney, Australia’s Largest Ethnicity. Urban Studies, Vol. 44, No. 4, pp. 699–721. Giorgas, D., 2000. Community formation and Social Capital in Australia. Paper delivered to the seventh Australian Institute of Family Studies Conference. Jupp, J., 2001. The Australian people: an encyclopedia of the nation, its people and their origins. Second edition. Cambridge: Cambridge University Press. Lee, D. and Murphy, P., 2001. Immigration in gateway cities: Sydney and Vancouver in comparative perspective. Progress in Planning 55; 119-194. International Migration Institute. 2006. Towards a New Agenda for International Migration Research. Oxford: University of Oxford. Markus, A. et al. 2010. Australia’s Immigration Revolution. Crows Nest NSW: Allen Unwin. Pickering, J., N.d. Globalization: A Threat to Australian Culture? Journal of Australian Political Economy, 48; 46-59.

Telling a Good Poem from a Bad One

Telling a Good Poem from a Bad One Telling a Good Poem from a Bad One Telling a Good Poem from a Bad One By Maeve Maddox What makes a poem good? The answer ultimately lies with the reader of the poem, but there is a certain consensus as to what makes a poem good or bad. According to the critic Coleridge, prose is words in their best order, while poetry is the best words in their best order. Poetry demands precision. The novelist can get away with less than precise expression from time to time because the story will pull the reader along. The job of the poet is to create a picture in the mind and an emotion in the heart. Every single word counts. The wrong choicea word with the wrong connotation or the wrong number of syllables or an unlovely combination of consonant soundsspoils all. The underlying thought of the poem is also important. Some poems are written to create a picture only, but the most memorable poems also convey a universal truth about the human condition. For me, a good poem leaves me with goosebumps along my arms. I think a poem is bad when it lacks a discernible point and sounds like prose. People are led to write a poem because they have been strongly moved by some event. Theyve experienced a strong emotion, received an insight, and wish to capture the experience in words. Only a few, however, succeed in turning the experience into a poem that will be meaningful to another person. On his site dedicated to examples of bad poetry, Prof. Seamus Cooney observes that most bad poetry is simply weak and ineffectual and lacking in interest. He says that memorably bad poetry is created by a poet unaware of his or her defects. He says that a really dreadful poem is the product of the right combination of lofty ambition, humorless self-confidence, and crass incompetence†¦. He collects examples of bad poems as a teaching device: For the student, having a genuine insight into the true badness of some poems is, I think, a necessary corollary of having a grasp of what makes good poems good. Heres an excerpt from one of Prof. Cooneys bad poems: Twas the year of 1869, and on the 19th of November, Which the people in Southern Germany will long remember, The great rain-storm which for twenty hours did pour down, That the rivers were overflowed and petty streams all around. from Saving a Train by William McGonagall (1825-1902) A successful poem doesnt have to rhyme or scan or have a certain pattern of lines. It does need to paint a picture with carefully chosen words. It should have a point that a reader unknown to the poet can respond to. Fortunately, poets can study a wide variety of poetrygood and badin order to learn what works and what doesnt. Some anthologies for the poet: The Oxford Book of English Verse 1250-1950 The Norton Anthology of Poetry (from Old English to Cynthia Zarin [b. 1959]) The Norton Anthology of Modern and Contemporary Poetry The Stuffed Owl: An Anthology of Bad Verse Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Freelance Writing category, check our popular posts, or choose a related post below:100 Whimsical WordsStory Writing 10120 Tips to Improve your Writing Productivity

Policing Functions Essay Example | Topics and Well Written Essays - 1000 words

Policing Functions - Essay Example On the other hand, under the function of taking charge to policing the world, police falls into different classifications: public, specialized and professionals. Sheriff, constable and watch are in-charge of crime control. However, even if one could highly associate these responsibilities with policing, police are not excuse from various controversies. One of them according to Walker and Katz is the political influence and corruption associated with power that police carry among themselves due to their highly diversified functions in the US Law Enforcement Industry. From Industry perspective for instance, police have substantial authority and power to give substantial opportunity for the third party to gain with illegal activities such as gambling, prostitution and drug trafficking. Furthermore, for some ordinary people according to Walker and Katz, police are under in any way of positive or negative stereotyping. Walker and Katz elaborate negative stereotypes for police as being une ducated, untrained, prejudiced, brutal and corrupt. The positive stereotype on the other hand points police officers as heroic saints. Although Walker and Katz also point that police are not entirely different from ordinary citizens, the negative or positive stereotypes at some point must have substantial evidence from actual perspective of the society on policing. On the other hand, another important perspective on policing is that it is unsuccessful. Police agencies are bureaucratic paramilitary organizations that have traditionally responded slowly to change (Jones, 2009). In this matter, Jones believes that administrators fail to understand the complexity of their environment... In this paper, the proponent tries to examine various perspectives of the policing function from local, state and federal organizational levels. By looking at the hierarchy presented in this essay and different classifications of police, one could actually say that policing in the United States is highly decentralized, fragmented and diversified. The researcher focuses on describing differences and similarities of their functions on each level. Policing may have potentially gained positive or negative image for a long period of time. Reforms may be necessary in order to correct major negative feedbacks which at some point may lead to inefficient function of policing. In conclusion, the researcher also tries to address possible future changes in laws and the overall impact that these changes will have on the field of policing, such as the use of technology in policing, that is very important in order to enhance more and fulfill the essential task or function of every police officer. I n this case, the judicial system and emancipation of law must ensure in its reform programs to give substantial opportunity for policing to gain remarkable advantage in exercising the following: crime prevention, policing the world, crime control and law enforcement. All of such changes are to ensure that the execution of policing would substantially meet the prevailing needs of the society. The researcher also hopes that in some way his suggestions could increase successful policing and address the potential correction of negative image of policing.

INDUSTRY ANALYSIS PROJECTS Research Paper Example | Topics and Well Written Essays - 1000 words

INDUSTRY ANALYSIS PROJECTS - Research Paper Example The scopes, opportunities and contexts of the publishing industry including the Canadian publishing industry are governed by the NAICS codes. But the advent of the internet and the increasing access of the population to the World Wide Web have blurred the geographical boundaries affecting the publishing industry. The value chain of this industry has undergone major changes and has assumed a more complex structure with the changes in the reading preferences of people as well as the changes in the teaching styles in different countries. The distribution channels of the publishing houses have also evolved with the shifting contexts of the industry. The geographical constraints of the publishing industry have been abolished and the importance of quality of publishing has become more critical for companies to survive in this industry. The publishing industry is dependent on achieving economies of scale in their operations and is dominated by the concentrated level of competition. The indu stry is in the maturity phase which needs to revamp the processes in order to prevent the saturation of the industry and create sustainability and development for the publishing industry. Innovation and balance between print and online publishing are critical factors that decide the scope of the publishing industry. The Canadian publishing industry has been facing major challenges in the changing global scenario. The powerful publishing companies in this industry being more focused on profit reaping rather than following the industry standards and have created certain obstacles in this specific industry. The domestic publishing firms are losing their importance due to the entry and dominance of the foreign publishing houses operating in the Canadian publishing sector. Other issues and boundaries faced in this industry are the achievement of economies of scale and the quick response to the shifting preferences of the consumers of the industry. The balance of power in

Manage Projects Essay Example | Topics and Well Written Essays - 750 words

Manage Projects - Essay Example Procurement management plan was designed to define the process and requirements for the project and a closeout report is presented here. This plan united the scope of the project with the risks associated with procurement. The plan elaborated the process from procurement planning to procurement closeout. From the first step of documentation to the contract closeout, procurement management takes into account all the risks that may occur in the process. The damage of these risks was not enormous however; procurement management deals with these risks beforehand and protects the organization from loss. The procurement process runs smoothly as all the precautionary steps were taken. There was no risk of understatement or overstatement of goods which protected the project from bearing high cost. This project was chosen because the organization needed high quality shrubs, tires and bricks and company’s capacity isn’t enough to produce such items inside the company. The project remained well under the limit of $575,000 with $5000 to spare and they were spent on taking care of buyer’s claims. Project finished before the planned deadline. Out of the identified risks, delayed delivery affected the schedule of the project by two days but it was covered up due to manager’s efficiency. Financial forecasts were very accurate as the whole project was accomplished within the monitory limitations. Management was present and available for supervision. All major management was performed by the procurement project manager but senior management was available for support and necessary tasks; approval for solicitation etc. Finances were also managed adequately. Approval from CFO was taken before planning the whole procurement. Project team worked effectively and efficiently with the stakeholders. Hierarchy was designed specifically for the whole procurement process. The project manager was responsible for the success

Overview Of Project Quality Management

Overview Of Project Quality Management Project Quality Management is a crucial element in 9 knowledge areas as the victory of any project is dependent on its quality and it is equally essential for Project Manager. In Project Management Domain, every person demands quality. The endeavor of this paper is to evaluate quality in project management domain by considering quality management in terms of following the quality planning, quality assurance and quality control processes by exploring the practices to success by maintaining cost, time and scope constraints. We will survey how quality affects the system and people associated with it and how to meet targets of any organization through better quality management. Keywords- Project Quality Management, Project Management Domain, Quality Planning, Quality assurance, Quality Control, Project Implementation. Introduction To Domain Project Quality Management is the most difficult knowledge area to define. The ISO defines quality as the totality of characteristics of an entity that bear on its ability to satisfy stated or implied needs (ISO8402:1994) or the degree to which a set of inherent characteristics fulfils requirements. Different experts have different views about quality. In software project management, Research have shown that most common reasons behind projects failure are schedule overruns, over budgets and the scope creep, these triple constraints (time, cost and scope) are termed as quality angle by Microsoft and changes made to any of these three sides probably effects the quality as quality is not a side of a triangle but is a outcome of what you do with time, cost and scope therefore these angles must be met for achieving quality of any project in the project management domain. The reason for failure can also be measured to be the eagerness of project managers in adopting new methodologies, tools, techniques, skills and knowledge for achieving success of any project but not focusing on the quality itself. Quality has different definitions in different organizations depending upon its standards but a basic one is that whatever is delivered should be according to the customer or organizations expectations. According to Howard Gitlow and Shelley Gitlow Quality is defined as surpassing customer needs and expectations throughout the life of the product. The quality of any project can be judged from different viewpoints e.g. business and technical. From business viewpoint the focus is on completing the project on time, within specified budget and according to the needs. From technical viewpoint quality verifies that the project conforms to the business standards e.g. documentation, user interfaces and the naming standards and the system to be produced should be maintainable. Therefore, the main principle of Project Quality Management is to guarantee customer satisfaction. To understand quality of any project, the project team must spend time and build up good relationships with stakeholders to realize what quality is according to them as only customer can decide if product quality is acceptable. Problem Description Many technical projects fail because the project managers mostly emphasize on written requirements rather than stakeholders expectations. For example, the project manager and his team must understand the importance of delivering 50 Intel Laptops to customer successfully. Changes are unavoidable during any project implementation, which may have a major or minor impact on projects estimated schedule, budget and defined constraints if not planned accordingly; it can lead to project failure. A 2002 survey of IT organizations shows that about 67% of the disputes on the functionality of the systems were that they did not meet up to claims of the developer and 56% of the disputes were due to slipped delivery dates which eventually ended in litigation.[13] For the management of project quality, quality planning, quality assurance and quality control holds an important point in the management domain. Every project must have a quality plan as it is a basic input for quality assurance and quality control but many organizations dont bother to produce a plan because of its complexity which often results in undesirable product outcomes. Scope There are certain tools and techniques used in the project quality management area but the main processes to be followed for the achievement of quality products are the Quality Planning Quality Assurance Quality Control A concise analysis of these processes would elaborate various inputs involved with these processes and the tools and techniques used to generate the required outputs that lead to the accomplishment of better quality products. In this paper, the success of quality will be discussed in terms of meeting defined time, cost and scope and how quality management processes leads to achieve targets of an organization. Proposed Approach The systematic approach that would be followed to achieve quality in projects is the quality management processes and the Re planning of cost, scope and time depending upon which module is more constraint in a particular project. Process Project Phase Key Deliverables Plan Quality Planning Quality Management Plan, Quality Metrics Quality Assurance Execution Change Requests Quality Control Monitoring and Controlling Quality control measurements Quality Re-Planning Re-Planning Trade-off between Quality Angle Table 1: Quality Processes [12] These processes usually take place at least once in any project to maintain the projects quality as mentioned in PMBOK8 but plan should not be fixed in any case, it changes as the project progresses and is monitored in Quality control phase by getting the customer feedback and evaluating its conformance to requirements and fitness for use, Re-planning is done if the Quality assurance is not performed as previously planned. A brief elaboration of each process is given highlighting IT Projects Quality. Quality Planning Planning Quality involves implementation of organizations quality standards and policies which should be followed in that particular organization.[3] A quality plan needs to cover a number of elements: [3] What work needs to go through a quality check? Tools and Techniques for quality planning? When should it be carried out and what resources are allocated? Who is responsible for the required quality? What should be the output? What work needs to go through quality check? The Quality of deliverables of project are checked for example a requirements document is checked if it is according to the customer demands similarly the quality check is carried our for other deliverables. For the milestones or checkpoints, a standard is followed to check their functionality. For the project itself, it may be appropriate to have the project management practices reviewed for quality once the project is initially established. This may be useful to give the Sponsor and top management a level of confidence in the team. Tools and Techniques for quality planning? Cost gain study- This study assures that gain should overweigh the cost. The productivity should be high with lower cost which satisfies customer requirements. Benchmarking- The performance of the project is measured in terms of planned performance or by comparing its performance with other projects in same application areas [4][5]. Quality Diagrams- Different charts and diagrams help in predicting quality problems and build up methods to deal with them. [7] When should it be carried out and what resources are allocated? Quality measurements are held prior to the delivery of product when there are long development times for a deliverable and the resources required for the development of project are allocated such as human resources, financial and material resources. For example, if four milestones of the project are estimated to be completed in 8 weeks but after the completion of 2 milestones the time left is only 3 weeks, it may be worth holding the inspection after each milestone to identify any problems early and reduce rework by reshuffling of resources and optimization of plan. Who is responsible for the required quality? The developers of the product as well as the customer both are responsible for the quality. In fact customer requirements define quality, not processes. For example a customer goes to a garments shop for purchasing a jersey, he would typically check its fabric, color, size and price if its according to his requirements than he would say its of good quality. He will not consider what processes are used to make it and how much time it took. In other words, it is not what you do or how you do it but who uses it that counts. Using the quality example again you can make the best clothing that was ever made, using the optimum materials and applying efficient processes but if no body needs it than it is just a waste. Hence, it is not only the project manager but the one essential to project success. [6] What should be the outputs of quality planning? The output includes the understanding of implementing quality policy by project management team. The quality plan should focus on Quality assurance (Execution), Quality Control (monitoring) and Quality improvement (Re-planning) of the project. Metrics and the checklists are most common outputs. Metrics describes what something is and how it is measured by quality control process for example the project management team makes a detailed schedule of start and end of every activity in the form of metrics. Many organizations use standard checklists to measure quality of activities performed. Quality Assurance (QA) In Quality Assurance (QA), the quality of a project is guaranteed by performing all the activities that are being planned from design to servicing and documentation that satisfies customer demands. It is a process of ensuring that the project meets quality standards which is also defined as quality measurements. [6][7] Quality Audit- is an important tool for quality assurance. These audits help to improve performance of future projects by learning lessons from previous projects. Quality audits are performed by many engineering industries by first designing a quality metrics for a project and then analyzing the metrics throughout the project development. Quality Audits are usually performed by internal (in-house) auditors or external (third parties) customer involved in the project. Audits can be conducted on schedule basis for example, after each milestone or they can be performed on random whenever there is a need or as ordered by top management. The main goal of Quality Audits is to identify ineffective standards and policies used and replace them with best practices. Quality audit verify the execution of approved change requests, corrective and preventive action and defect repairs. [6] Quality Assurance Plan- Large projects usually involve thousands of activities which becomes complex for quality assurance to track them. So they should be collected in quality assurance plan for their efficient management. A standard for Quality assurance plan is developed for an organization and it is the responsibility of project team members to develop one which should include the following elements [6] WBS (Work Breakdown Structure) User Requirements and Specification Activity to be performed When to perform the activity Who will perform the activity Quality Assurance Output- Quality Improvement improves the value and usefulness of a project and provides benefits to the project stakeholders [6]. Quality improvement not only improves the quality of project management but also it improves the quality of a product by following a continuous cycle known as The Plan-Do-Check-Act cycle [1] which is the source of Quality Improvement. As customer needs changes with time so this process helps to meet their new requirements by getting their feedback on regular basis, it may also help to reduce costs by providing long-term benefits for customer satisfaction. Plan a change in the right process for getting for improving it and getting beneficial results. Do apply the change as a test case to test if it gives the desired results. Check the effect of the applied changes in the entire system by analyzing it thoroughly. Act to apply the change to the entire system based on the result of test cases if it provides the desired result. [6] Follow the cycle for other processes for an improved change. Barriers to Quality Improvement- Quality improvement bring changes in a product to improve its quality but because of its complexity it is not always considered significant to be followed in every project. It is the responsibility of top management and due to the risk that an improvement change would not produce the desired results prevents the management from applying this policy. On the other hand, long-term benefits produce by the improvement would overcome the short-term risk. Quality control Quality Control is the process for monitoring specific project results to determine whether the comply with relevant quality standards and identifying ways to eliminate causes of unsatisfactory performance (comp. PMBOK3) [8] The Project results are usually monitored throughout this phase and if an inconsistency is observed in the planned specification and the actual results, the project team takes corrective actions to repair that variation and take precautionary steps to avoid this variation from reoccurring. These results are generally examined by Quality Audits and the Quality Assurance Plan and Activities are improved according to the requirement. [11] The Quality Control, therefore strives on the Project Results, checklists and the quality management plan for monitoring actual results. Various Tools are being used for the measurement of Quality control. Through the use of Inspection and Statistical Sampling, data about the performance of actual system is compared with the quality standards. Cause and Effect Diagrams provides knowledge about the reasons of any deficiencies. Many other tools are used to display performance data such as Control Charts, Flowcharts, Histograms, Pareto Charts, Run Charts, and Scatter Diagrams,[10] the data is not simply displayed but gives an insight of useful information about the products conformance to requirements and illustrates whether the quality standards are met. If the quality is not acceptable, a Change Request will be made. If the deliverables are acceptable, the output of Validated Deliverables goes to the Verify Scope process for final approval. [7] Quality Re-Planning The nature of Project Quality management must focus on the product of project as well as the management of project because severe consequences can result for project stakeholders from failure to meet quality requirements in any of these dimensions. [7] Re-Planning is done when the actual target about project management that is defined in the Quality Planning phase seems to fluctuate concerning scope, time and cost of the project which can be measured at anytime at the completion of any deliverables and milestones during the product development. It is the responsibility of Project Manager that he should balance both dimensions, the product goals and the management goals. The project team should not overwork to achieve product quality as it reduces the management quality by resulting in Employee turnover [7]. Similarly, the three elements of management dimension must be balanced by project manager throughout the development activity. For example, the information technology teamwork project has a preliminary scope of generating a sixty to seventy pages report and one and a half hour presentation on any twenty five prospective IT projects. The preliminary time and cost of this project is set as two months and $65,000. This estimation provides the targets to be achieved for scope, time and cost at the start of Project. Balancing them through the end of the project is fairly an ideal situation which is not always possible as a result trade-offs are made between these triple elements depending upon the importance of that particula r element in the given situation and the experienced project manager. For example, to collect at least twenty five good ideas about the IT teamwork project, a survey is planned online to be done within a week with a cost of approximately $4,000 and suppose the survey produced only few good ideas in the given time and cost. In this situation, the collection of ideas is most essential as it is the key input so the time and cost are adjusted for the achieving the desired scope [2]. Re-planning is therefore, changing the initial plans if it is desirable for the accomplishment of Projects Management. Fig 4. Managing Quality APPLICATION AREAS Enterprise wide Quality Management Systems Due to the latest developments in information technologies and system design, advance quality management software has been established with the ability to incorporate quality software applications with business processing systems. The open architecture and object-oriented technology is the source of these new systems, incorporated quality management can be attained by connecting system components to the enterprise management system. The modules are associated through a standard interface structure that enables different applications to exchange information. Integrating the quality management system with business automation systems can considerably affect profitability. Such integration reduces the time and effort related with data entry. An incorporated quality management system offers online access of data stored within each system component. Through associating this data into automated reporting systems, management can carry out assessments on serious processes that states a compan ys victory. [14] Automotive Industry Automotive sector has been active in inventing new manufacturing strategies having to current high level of competition. With this scenario the challenges faced by Original Equipment Manufacturers (OEM) have also increased over the years. Due to this high level of competition, companies have indeed emphasized to increase the quality in all aspects of products and services within their management system. Therefore quality management (QM) has become increasingly popular as one of the managerial devices in ensuring continuous improvement as to improve customer satisfaction and to ensure its product or service quality. Another dare tackled by automotive industry is the stress to reduce delivery period and cost. Quality Management element with support for advanced features like TQM will help to uphold quality from basis. This receives importance owing to the continuous pressure exerted to cut cost and improve quality. [15] Airline Business The safety of airplanes in service is critical in the aviation business, both in terms of accident avoidance and economic performance. The recent valuation of consequences to the airlines by the Federal Aviation Administration (FAA) has highlighted the challenges faced by the airlines. Lack of compliance tools and insufficient quality management is bullying an unparalleled crisis in the airline business. An operational program to handle FAA ordinance to be used by airlines business requires an incorporated, enterprise-wide quality management solution that includes a dominant acquiescence platform which provides strong domain expertise in airline and aerospace equipment. The best examples counted in providing world-class acquiescence and quality solutions is the Tata Consultancy Services and MetricStream which includes a best solution for airline business in the form of global corroboration and support services [16]. E-Service Quality Management Todays Society emphasizes more on the use of modern communication and information technologies. E-services is an example of modern computer application that provides access to online services. Quality Management Systems are required to offer a reliable way to select, analyze, rank and design the right eservices. The growing consumption of e-services has elevated the requirement to state principles and means to evaluate and assure quality. Investment in e-services is a significant step towards improving the quality of life in our vigorous society. A Quality Management Framework in the context of e-services has the following components: e-service as object (entity), e-service development and delivery process as process, business and consumer as users, specific service request as request as requirements, evaluation and measurement of the e-service to determine its quality. E-Service Quality Management Framework provides benchmarking capabilities and comparative assessment of e-services. It also supports making decisions in improving the quality of service and overall customer satisfaction. [17] POTENTIAL RESEARCH AREAS Improve Quality Management for modern development methodologies: RAD, Agile and Extreme Programming Rapid Application Development (RAD) refers to a type of software development methodology that uses minimal planning in favor of rapid prototyping. The planning of software developed using RAD is interleaved with writing the software itself.[18] However, there can be real difficulties with this approach. Frequent change tends to corrupt software structure making it more expensive to change and evolve to meet new requirements. Progress can be hard to evaluate and problems can be hard to find because there is no documentation to reveal what has been done. Therefore quality of the software may suffer. Without a specification it may be difficult to validate the system. [19] Improve Quality through Customer Involvement Quality is not determined or defined by the producing company. Quality is determined by the customer. Thus quality of a product or a service is the customers perception of the degree to which the product or service meets his or her expectations. [20] New Techniques for developing a strategic quality plan Organizations face a continuous barrage of requests to improve quality. Every quality management plan can, and must be tied to key business process performance indicators in order to have any real impact on productivity and the bottom-line. However, strategic plans are rarely translated into the quality strategies needed to ensure overall performance improvement gains. [21] CONCLUSION Project Quality management is becoming a part of every project from information technology to enterprise and different industries for the achievement of high quality products and services. By following the quality processes in systems, the quality can be greatly improved and in order to attain efficient Project Quality Management, the concepts of Project Quality management are also incorporated with the quality processes. The project manager and team should have the clear conception about management for managing quality processes. The Proposed Quality Processes cover both aspects of Quality, the product of the project as well as the management of project in the light of scope, time and cost. Project Quality Management is suitable for applications related to IT and Management systems. REFRENCES Frank J. Koksis, Project Quality Management, November 15, 2006. Kathy Schwalbe, Information Technology Project Management 4th Edition pp 289-337. Neville Turbit, Project Quality Planning in the Project Perfect White Paper Collection. June 2005 (Available at http://www.projectperfect.com.au ) Pawan Kumar, Quality Planning Tools PMI Westchester Quality SIG. November 2007. MJ ODwyer, Quality Planning tools and techniques in Quality Planning for a Project. April 23, 2010. Kenneth H. Rose, Project Quality Management Why, What and How J Ross Publishing Inc. 2005. pp 40-72. King Fahad University of Petroleum Minerals, Project Quality Management Virtual Course, Project Quality Management (Available at http://www.pmeducate.info_sample ) Microsoft Quality Angle (Available at http://www.maxwideman.com/musings/triangles.htm) TapUniversity, Perform Quality Control Process. June 15, 2009. (Available at http://blog.tapuniversity.com/2009/06/15/perform-quality-control-process/) Project Management Institute, PMBOK8 (Available at http://www.softwareresearch.net/fileadmin/src/docs/teaching/SS06/PM/PMBOK8.pdf) Project Quality Management in Project Management (Available at http://www.slideshare.net/guest4408ddc/project-management-3289318 ) Ian Sommerville, A brief overview of Software Engineering in Software Engineering-7th edition. 2004. Ned Greenberg and Leonard Hemphill, Enterprise Wide Quality Management Systems (Available at http://www.qualitydigest.com/feb99/html/body_enterprize.html ) Significance of TQM in price sensitive automotive industry in ERP categories (Available at http://www.eresourceerp.com/Significance-of-TQM-in-automotive-market.html ) Effective Safety and Quality Management in the Airline Industry for Improved Business Performance(Available at http://www.metricstream.com/webinars/webinar_05june08_TCS.htm ) Lorena Batagan, E-Service Quality Management in Software Analysis, Journal of Applied Quantitative Methods. (Available at http://jaqm.ro/issues/volume-4,issue-3/pdfs/batagan_pocovnicu_capisizu.pdf) Rapid Application Development as used in software development/management (Available at http://en.wikipedia.org/wiki/Rapid_application_development) Agile Software Quality Assurance (Available at http://www.sqa.net/agile-software-quality.html) Total Quality management (Available athttp://www.promptpapers.com/free_term_papers.php?term_paper=2674386title=Total-Quality-Management) Develop a strategic quality plan (Available at http://www.bia.ca/strategic-quality-planning.htm)

Nora Helmer in Ibsens A Doll House Essay -- A Doll’s House Essays

In 1879, Henrik Ibsen published the play A Dolls House. However, to much of his displeasure the portrayal of the third act was considered erroneous to critics and audiences of that time frame. This controversy centered on the play’s conclusion in Nora's decision to leave her marriage and abandon her children. Critics labeled this decision appalling and unrealistic, since at that time in history no true woman would ever make such a choice. This uproar forced Ibsen to write a second ending where Nora instead decides that the children need her more than she needs her freedom. Thus, leaving critics and audiences contently satisfied. Since then, though times have changed and ideas and beliefs of the past have been altered, maybe the critics had it right about Nora’s departure. Perhaps Ibsen’s original ending is better left unsaid. Therefore, other than the alternative ending that Ibsen produced, how might the character of Nora deal with the situation at hand differently, based on what can be determined about her from the text? For starters, how about confronting the title of the story? Just who is the Doll? Many may claim that the doll is automatically Nora, for the reasons that she has been molded by her father and then toyed around with by her husband. To those individuals, Nora may seem like she is the victim, the poor little girl who can not comprehend who she is, the sweet â€Å"sky-lark† who had to leave her family for the findings of her true inner being†¦Or on a different note, Nora is the master and the controller of all that is functioning in the Helmer household. Although her husband, Torvald, may refer to her as a sky-lark, squirrel, or singing bird, it can be viewed in the text that Nora does not object to these remarks but r... ...a man who loves her and abandoning her children. Point in taking: Nora served no sense of accomplishment and only declared her egotism in a single selfish act. In the end, Nora’s greatest strength became her greatest weakness and it lead to her vindicated defeat. If only Nora used her powerful gift of control to step up to society instead of blocking it out, would she been able to save herself, her family, and her characters reputation as a feminine heroine, instead of a controversial role. But perhaps the controversy over Nora’s character is what we cherish so deeply because it is beyond our understanding. The idea that she is someone who is eternally captivating but can never fully be defined completely. Works Cited Kennedy, X.J. and Gioia, Dana. Backpack Literature: An Introduction to Fiction, Poetry, and Drama. New York: Pearson Longman, 2006. 778-843. Nora Helmer in Ibsen's A Doll House Essay -- A Doll’s House Essays In 1879, Henrik Ibsen published the play A Dolls House. However, to much of his displeasure the portrayal of the third act was considered erroneous to critics and audiences of that time frame. This controversy centered on the play’s conclusion in Nora's decision to leave her marriage and abandon her children. Critics labeled this decision appalling and unrealistic, since at that time in history no true woman would ever make such a choice. This uproar forced Ibsen to write a second ending where Nora instead decides that the children need her more than she needs her freedom. Thus, leaving critics and audiences contently satisfied. Since then, though times have changed and ideas and beliefs of the past have been altered, maybe the critics had it right about Nora’s departure. Perhaps Ibsen’s original ending is better left unsaid. Therefore, other than the alternative ending that Ibsen produced, how might the character of Nora deal with the situation at hand differently, based on what can be determined about her from the text? For starters, how about confronting the title of the story? Just who is the Doll? Many may claim that the doll is automatically Nora, for the reasons that she has been molded by her father and then toyed around with by her husband. To those individuals, Nora may seem like she is the victim, the poor little girl who can not comprehend who she is, the sweet â€Å"sky-lark† who had to leave her family for the findings of her true inner being†¦Or on a different note, Nora is the master and the controller of all that is functioning in the Helmer household. Although her husband, Torvald, may refer to her as a sky-lark, squirrel, or singing bird, it can be viewed in the text that Nora does not object to these remarks but r... ...a man who loves her and abandoning her children. Point in taking: Nora served no sense of accomplishment and only declared her egotism in a single selfish act. In the end, Nora’s greatest strength became her greatest weakness and it lead to her vindicated defeat. If only Nora used her powerful gift of control to step up to society instead of blocking it out, would she been able to save herself, her family, and her characters reputation as a feminine heroine, instead of a controversial role. But perhaps the controversy over Nora’s character is what we cherish so deeply because it is beyond our understanding. The idea that she is someone who is eternally captivating but can never fully be defined completely. Works Cited Kennedy, X.J. and Gioia, Dana. Backpack Literature: An Introduction to Fiction, Poetry, and Drama. New York: Pearson Longman, 2006. 778-843.